Testimonials / Media

Equipment Sales

Training

Practice

Advice

Travel

Events

Contact Us

INON Lens Holder S

The aluminium INON lens holder S accepts M67 fit lenses including the INON UWL100M67 wide - angle, UCL165M67 and UCL330M67 close up lenses and UR Pro colour correction filters. It's meant to accept a single lens or filter although you may be able to stack accessories.

INON Lens Holder W

The aluminium INON Lens Holder W can be configured to hold one or two M67 threaded underwater camera lenses or filters. It attaches to most INON frame arms or to the INON Grip Base D3 or, using an adapter, the INON Grip Base D4.

INON Lens Holder AD

The INON Lens Holder AD accepts INON AD and AD28 bayonet mount type lenses.  These include the INON UFL165AD fisheye lens, UWL105AD, UWL100-28AD wide - angle lenses and UCL165AD close up lens. It can be configured to hold one or two lenses (UCL165AD can easily be stacked). It attaches to most INON frame arms and to the handgrip of the INON Grip Base D3 or, using an adapter, the INON Grip Base D4.

INON AD Lens Holder for Float Arms

INON AD type lens holder accepts a single AD bayonet type INON underwater lens such as the INON UFL165AD fisheye lens, UWL105AD, UWL100-28AD wide - angle lenses and UCL165AD close up lens. UCL165AD lenses can be stacked. It attaches to any INON Float Arm.
 

INON Lens Holder S for Float Arms

The aluminium INON lens holder S accepts M67 fit lenses including the INON UWL100M67 wide - angle, UCL165M67 and UCL330M67 close up lenses and UR Pro colour correction filters. It's meant to accept a single lens or filter although you may be able to stack accessories.

INON Lens Holder LD

Designed for the new H 100 lenses, this INON lens holder lets you securely store wide- angle and close up lenses on your INON Float Arm.

Housing, Tray, Strobe, Video and Focus Light Adapters

INON provide a choice of adapters to help you configure your INON strobe or video arm to fit most underwater camera equipment manufacturers housings, trays, strobes, video lamps or focus lights. Often there will be more than one way to do this and Steve or Mark can offer guidance as to which option might work best for you.

INON T - Slide

The INON T Slide fits the popular T shoe used on many, if not most, underwater housings, including Subals.  Ball fitting allow for almost unlimited movement of arm via INON clamp for perfect light placement. The INON T - Slide lets you quickly remove your INON strobe arm for hand held lighting or for storage.

INON Multi Base II

The INON Multi Base lets you clamp your INON strobe arm to your housing or tray.  Ball fitting allows for precise light placement via movement of  INON clamp. It is very secure but does require you to remove one clamp to disassemble your system. 40mm high.

INON Multi Base II Long

A longer version of the Multi Base 11 provides extra height. You may prefer this as it provides slightly more mobility for the clamp to move around. 76mm high.

INON Z - Adapter

The INON Z- Adapter fits to the underside of your INON S-2000, D-2000 or Z-240 underwater strobe. Three location studs prevent the strobe head rotating accidentally. Choice of three mounting positions to suit your own preference.  Captive retaining screw prevents loss of securing bolt.

INON Z Joint

The INON Z Joint attaches to the base of your INON S-2000, D-2000 or Z-240 strobe. It lets you mount these strobes to an INON Grip Base D4, INON YS Frame Arm,  or any other arm with a Sea and Sea  type strobe fitting. Four studs prevent accidental strobe rotation. It can be joined to an INON Shoe Base for mounting to an accessory or cold shoe, including those built into some INON Lens Bases.

INON Shoe Base

The INON Shoe Base secures into a cold or accessory shoe. It accepts accessories with a Sea and Sea strobe type fitting such as small flashguns , video lamps or focus lights. It also accepts the INON Z Joint for mounting INON underwater strobes or LE light Holder for mounting INON LE Series video lights. The Shoe Base uses a swivel joint allowing 360 degrees rotation of your light. When combined with an INON Z Joint or Le Light Holder you can also adjust the angle of your lightvertically. The combination of an INON Shoe Base and Z Joint is easily mounted onto the newer INON Lens Bases and the INON X2-GF1 Micro Four Thirds camera housing for the Panasonic GF-1.  This is ideal for fitting focusing lights or for point and shoot close up stills photography or video work.

INON YS Adapter

The INON YS Adapter fits underwater strobes and video lights with the Sea and Sea type connection. Ball fitting allows virtually unlimited movement via INON clamp for perfect aiming of your strobe, video lamp or focus light.

INON YS Fixing Bolt

Simple bolt and friction washer set for attaching a strobe, video lamp or focus light with a Sea and Sea fitting directly to an INON Grip Base D3 or D4 or to an INON YS type Frame Arm.

INON Clamp

INON clamp engages with ball and O ring design of INON arms and other accessories. Spring loading for perfect tensioning to match equipment, conditions and personal preferences. Long shank allows jaws of clamp to be widely opened for easy assembly/disassembly of  arms without the clamp falling apart as some others do. Unmistakable clamp and tensioning handle prevent misalignment. Handle is easy to grip, even with gloves. Jaws allow 80 degrees lateral movement, helping with precision light aiming.

INON LE Light Holders

INON LE Light Holders are available to carry one, two or four INON LE Series Video Lights. Using multiple lights allows you more control of intensity, as you can reduce power by turning lights off, or cope with long dives by switching from a used light to a fresh one mid dive. Non- slip design means light won't rotate when you switch it on or off or add or remove filters or diffusers.

INON Single Light Holder LE

For single INON LE Series underwater video light. Incorporates a built in fitting to mount to any YS type strobe arm, INON Grip Base D4 or INON Shoe Base.

INON Double Light Holder LE

Accepts two INON LE Series underwater video or focus lights. Requires an INON Z Joint to connect it to YS type fitting strobe arms, INON Grip Base D4 or INON Shoe Base.

INON Quad Light Holder LE

For mounting eirhrt two or four INON LE Series underwater video or focusing lights. Requires an INON Z Joint for attachment to YS type underwater strobe arms, INON Grip Base D4 or INON Shoe Base.

Strobe Light Holder LE

This very useful accessory mount lets you place one or two INON LE Series underwater video lights alongside your INON S-2000, D-2000 or Z-240 strobe. This helps with lighting subjects at a distance, either for assisting with auto or manual focusing or simply for illuminating your subject and its surroundings in the dark. This has obvious applications for wreck and cave diving, but also lets you use red filters to spot shy subjects, like mandarin fish, that react badly to white light. When  used for alternating between shooting stills and video, having the video light mounted on your INON articulated arm lets you light your movie subjects perfectly.

For more detailed advice on choosing the most user frieindly arm system for your underwater camera, please give INON underwater photography instructors Mark or Steve a call.